Make sure your Toyota is parked on a level surface, turn the engine off and open the bonnet.
Find and remove the AdBlue™ tank cap.
Insert a bottle of AdBlue™ and fully tighten it.
Push down on the bottle and begin to refill. Do this slowly so it doesn’t spill and don’t remove the bottle until it’s empty.*
Check that nothing is left in the bottle and then remove it.
Repeat steps 3-5 until approximately 3.8L or more of AdBlue™ has been added.
When full, close the AdBlue™ tank cap (make sure you hear a click when you do this) and then check that the engine starts. This may take a few seconds longer than normal.
*Please ensure that none of the liquid is spilt onto the bodywork as it can cause damage.